EV200-0004G-S2: コンパクトな単相VFD| 0.4kW、220V
Why Choose This 0.4 kW (0.5HP) 220V Single Phase VFD?
Choosing the right drive is crucial for performance and reliability. This specific 0.4 kW (0.5HP) VFD is the ultimate space-saver and the ideal choice for straightforward applications.
Designed for Tight Spaces: Its key feature is the ultra-compact narrow body design, which is 45% smaller than previous models. It also supports side-by-side installation, making it perfect for crowded control cabinets where space is a premium.
Simple and Efficient: While the EV510A series offers complex, high-count I/O, the EV200 is designed for simple speed regulation. Its streamlined 4 DI / 1 AI / 1 Relay setup provides all the necessary control for small automated machinery without unnecessary complexity or cost.
Reliable Vector Performance: Despite its small size, it delivers true vector control performance, providing excellent low-speed high-torque (150% at 0.5Hz) for reliable startups, far surpassing simple V/F control.
No Braking Unit: This model does not include a built-in braking unit, as it is part of the 0.75-2.2kW range, which is designed without them, making it a cost-effective choice for applications that do not require rapid deceleration.
代表的な応用分野
Woodworking Machinery
A perfect compact VFD for wood carving machines (engraving machines) and small spindles.
Glass & Ceramic
Provides precision speed control for glass edging machines and small grinders.
Textile Industry
Simple speed control for small textile machines and winders.
制御特性
制御モード | PGベクトル(SVC)、V/F制御なし |
|---|---|
最高頻度 | ベクトル制御: 0~500Hz; V/F 制御: 0~500Hz |
スタート・トルク | Gタイプ0.5Hz/150% (SVC) |
速度範囲 | 100分の1（SVC） |
速度制御精度 | ±0.5% (svc) |
過負荷容量 | Gタイプ150%定格電流60s；180%定格電流3s |
I/O仕様
デジタル入力 | デジタル入力端子4系統 |
|---|---|
アナログ入力 | アナログ入力端子×1 |
リレー出力 | リレー出力端子×1 |
コミュニケーション | Modbus、RS85（RS485を想定）、CANopen、CANlinkをサポート |
動作環境
設置場所 | 屋内、直射日光の当たらない場所、ほこり、腐食性ガスなどのない場所。. |
|---|---|
高度 | 1000メートル以下 |
周囲温度 | -10°C～+40°C（40～50°Cの場合はディレーティングが必要） |
湿度 | <95%RH、結露なし |
構造寸法
寸法（幅×奥行×高さ） | 73 x 112.6 x 143 mm |
|---|---|
設置サイズ (A x B) | 60 x 129 mm |
取り付け穴 | Ф4.4 |
品質保証
本製品は南京欧瑞電機有限公司が開発、製造したものです。産業オートメーションと新エネルギーに重点を置く国家ハイテク企業として、当社は経験豊富な研究開発チームと先進的な生産設備を持っており、世界中のお客様に高品質で信頼性の高い製品とソリューションを提供することに専念しています。.
よくある質問（FAQ）
1.V/F制御とセンサレスベクトル制御（SVC）の違いは？
V/F control is a basic method for motor speed regulation. Sensorless Vector Control (SVC) is more advanced, providing precise speed and torque control. The EV200 uses SVC to deliver high starting torque (150% at 0.5Hz), which is much better for starting loads than basic V/F.
2. Does the EV200-0004G-S2 have a built-in braking unit?
No. The EV200 series states that models from 0.75kW to 2.2kW do not have a built-in braking unit, and this 0.4kW model follows that design. An external braking resistor would be required for applications needing fast deceleration.
3. What is the key difference between the EV200 and EV510A series?
The EV200 is designed for simple speed regulation and ultra-compact size, featuring a narrow body that is 45% smaller and allows side-by-side installation. Its I/O is simplified (4 DI, 1 AI, 1 Relay). The EV510A series is a higher-performance drive with a much larger, more flexible I/O (7 DI, 2 AI, 2 AO, 2 Relay) for more complex automation tasks.
4. Can this VFD be installed in a small cabinet with other drives?
Yes. The EV200 features independent air ducts for efficient cooling and is specifically designed to be installed side-by-side with other units, making it ideal for saving space in power distribution cabinets.
クイックスタートガイド（ハウツー）
警告だ： The following steps are a basic guide only. All electrical work must be performed by qualified professional personnel. Before any wiring, ensure the main power is completely disconnected and wait at least 10 minutes for the internal capacitors of the VFD to discharge fully.
ステップ1：インストール
Mount the inverter vertically on a sturdy, non-flammable surface, such as a metal mounting plate. Ensure there is sufficient clearance for heat dissipation. Side-by-side installation is permitted.
ステップ2：主回路の配線
を接続する。 単相220V インバータの入力端子へのAC電源ライン
R/L1そしてS/L2.三相非同期モータの3線をインバータの出力端子に接続する。
U,V, そしてW.アース線をインバータの
PE(保護アース）端子。.
ステップ3：制御回路の配線（基本的なスタート／ストップの場合）
外部スイッチ（またはボタン）の一端をデジタル入力端子に接続する。
S1.Connect the other end of the switch to the
COMterminal.設定パラメータ
P0-02(コマンドソース選択）を “1”（端子コマンドチャンネル）に設定します。.設定パラメータ
P4-00(S1機能選択)を “1”(正転運転)にする。.
ステップ4：モーターパラメータの設定とオートチューニング
最初の電源投入時に、モータの銘板から以下のパラメータを正確に入力してください：
P1-01:モーター定格出力（0.4kWに設定）P1-02:モーター定格電圧（220Vに設定）P1-03: Motor Rated Current (e.g., 2.3A)P1-04:モータ定格周波数P1-05:モーター定格回転数
最適なベクトル制御性能を得るには、モータ自動チューニングを実行します。パラメータの設定
P1-37(Motor auto-tuning) to “2” (dynamic auto-tuning) or “3” (static auto-tuning) and start the inverter.
ステップ5：テスト走行
すべての配線とパラメータ設定が正しいことを確認した後、主電源を入れます。の間に接続されている外部スイッチを閉じます。 S1 そして COM. .モーターが正転方向に回転し始めるはずです。スイッチを開くと、設定された減速時間に従ってモーターが停止します。.
主な特徴と利点
Ultra-Compact Narrow Body: Features a new narrow body design and compact structure. Compared to older products, the installation size is reduced by 30% and the volume by 45%, saving installation space and reducing distribution costs.
Space-Saving Installation: The design features independent air ducts for efficient, straight-through heat dissipation, which allows for side-by-side installation to maximize use of cabinet space.
High Starting Torque: This AC motor drive is capable of 0.5Hz starting torque at 150% under Sensorless Vector Control (SVC), providing excellent low-speed performance for general-purpose loads.
Robust Overload Capacity: As a G-type drive, it handles 150% of its rated current for 60 seconds and 180% for 3 seconds, ensuring stability during load changes.
Simplified I/O: Designed for simple speed regulation, this model features a streamlined I/O configuration of 4 digital input terminals, 1 analog input, and 1 relay output.
Smart Integrated Functions: Includes a built-in PID controller for process control, a Simple PLC for multi-stage speed running, and Auto-adjust voltage (AVR) to keep output voltage steady when the grid voltage changes.
ファイル | サイズ | アクション |
|---|---|---|
VFD選択ガイド.pdf | 4.2MB | |
VFD EV200 ユーザーマニュアル.pdf | 1.4MB |
